DIY - Passat CC Replace Front Brake Pads

Changing your front brake pads can be done quickly because they are easier than the rear brake pads.
When changing the front brake pads on Passat CC you don't need third party apps as VCDS.

Requirements:

T45 Torx Bit
Screwdriver
Clamp

Step # 1: Remove both front wheels.
Step # 2: Remove caliper bolts but you need remove both rubber plugs first.
Step # 3: Use the screwdriver to remove the caliper spring.
Step # 4: Open your brake fluid reservoir, Now push piston back on caliper using clamp.
Step # 5: Now replace the brake pads, there will be a brake wear warning wire on driver's side.
Step # 6: Put the caliper back onto the carrier, reattach the caliper bolts, reinstall the caliper spring.
Step # 7: Put the wheels back, pump the brakes a few times until they feel normal and you're done.